Brief introduction

The jaw crusher is mainly used for coarse and medium crushing of various ores in mine crushing, sand and stone production line and construction crushing. In order to meet different needs, the main models of the jaw crusher produced by Leitos Machinery are: PE deep cavity jaw crusher, PEW European jaw crusher, and even developed a mobile jaw breaking machine.

The crushing mode of the jaw crusher is flexural extrusion type, and the operation principle mainly simulates the two jaw movements of animals. When working, the motor drives the belt and pulley, and makes the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the Angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate, and the material is crushed by extrusion, rubbing and grinding between the two jaw plates. When the moving jaw goes down, the Angle between the elbow plate and the moving jaw becomes smaller, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring, and the broken material is discharged freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the movable jaw is periodically crushed and discharged to achieve mass production.
Features:
Deep cavity crushing, energy saving
Optimized deep cavity crushing, no dead zone, feed and crushing efficiency greatly improved, good energy saving effect.

Simple structure, easy maintenance
Under the basic principle of tilting, the redundant parts are simplified, the overall structure of the equipment is simple, the crushing capacity is strong, the operation and maintenance are convenient, and the operating costs are low.

Strong bearing capacity, high stability
The larger forging billet processing heavy eccentric shaft, high manganese steel jaw plate and high cast steel moving jaw assembly, the equipment has stronger bearing capacity and higher stability.

Low noise, less dust
The equipment refers to the national environmental protection standards, low noise, can be equipped with dust removal equipment, and the construction environment fully meets the environmental protection requirements.

Mature technology, long service life
Drawing on the world manufacturing process, the digital analysis of the operation of each component, the internal structure is exquisite, and the service life of the equipment is greatly extended.

Large discharge adjustment range, a multi-purpose machine
Gasket type discharge adjustment device, large discharge adjustment range, increase the flexibility of equipment use, can meet a variety of customer processing requirements.