Brief introduction

The crushing mode of the jaw crusher is flexural extrusion type, and the operation principle mainly simulates the two jaw movements of animals.

When working, the motor drives the belt and pulley, and makes the moving jaw move up and down through the eccentric shaft.

When the moving jaw rises, the Angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate, and the material is crushed by extrusion, rubbing and grinding between the two jaw plates.

When the moving jaw goes down, the Angle between the elbow plate and the moving jaw becomes smaller, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring, and the broken material is discharged freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the movable jaw is periodically crushed and discharged to achieve mass production.