The crusher is an essential equipment in the sand production line, and the output of the crusher will directly affect the economic benefits of the entire production line. So, what factors will affect the output of the crusher? Generally speaking, there are five main factors, the hardness, composition, fineness, viscosity and humidity of the material. Here is a detailed introduction:

crusher
First, the hardness of the material:
The harder the material, the more difficult it is to break, and the more serious the wear on the equipment. In the crushing process, the operation of the whole machine will also slow down, and the crushing time will be longer, which will lead to the weakening of the crushing capacity.
Second, the composition of the material:
The more fine powder contained in the raw material, the more it affects the crushing, because these fine powders are easy to adhere and affect the transportation. Therefore, for these fine powder content of the material should be screened in advance.
Third, the fineness of the finished material requirements
The higher the fineness of the finished material, the more complex the crushing process and the longer the time, which makes the crushing capacity smaller.
Fourth, the viscosity of the material:
The greater the viscosity of the material, the easier it is to adhere. The material with large viscosity will adhere to the inner wall of the crushing chamber in the crusher, if it can not be cleaned in time, it will seriously affect the working efficiency of the crusher, and seriously affect the normal operation of the crusher. Therefore, when selecting the material, we must pay attention to the viscosity of the material can not be too large.

crusher
5, the humidity of the material
When the water content in the material is large, the material is easy to adhere in the crusher, and it is also easy to block during the unloading transport process, resulting in reduced crushing capacity and affecting normal production. Strictly control the humidity of the material when selecting the material, and reduce the humidity of the material by sunshine or air drying if necessary.
The above is about what factors will affect the output of the crusher, I hope to help you in the use of the crusher. If you want to know more about the crusher, welcome to call or online consultation, message, Leitos machinery will send professionals to answer your questions.