In the use of the crusher, sometimes there will be automatic shutdown after the start of the problem, affecting the use of the effect, and even damage to the equipment. This article will be a detailed introduction to the causes and solutions of the automatic shutdown of the crusher after starting, to help you quickly solve this problem. The details are as follows:
First, the reason for the automatic shutdown of the crusher

1. Overload protection
   When the crusher is running, because the material is too much or too hard, it will make the equipment overloaded, and the overload protection device of the crusher will start, so that the equipment will automatically stop to protect the equipment from damage.
2. Circuit failure
   Circuit failure is another reason why the crusher automatically stops after starting. Circuit faults may be caused by problems such as poor circuit contact, short circuit or open circuit.
3. Mechanical failure
   The automatic shutdown of the crusher after starting may be caused by mechanical failure, such as problems with the transmission system of the equipment, internal faults of the machine, etc.

crusher
Second, the solution

1. Check overload protection
   When the crusher automatically stops after starting, it is necessary to open the equipment housing and check whether the overload protection switch is loose or damaged. If there is loose or damaged, it needs to be replaced or fastened in time to ensure normal operation.
2. Check the circuit
   If there is a problem with the circuit leading to the automatic shutdown of the crusher after starting, it is necessary to check whether the circuit is in good contact, or whether there is a short circuit or open line, and remove the problem in time to ensure the normal operation of the equipment.
3. Eliminate mechanical problems
   When the crusher automatically stops after starting, it is necessary to check whether the transmission system of the equipment is faulty, and check whether there are impurities or other objects blocked inside the machine, and timely treatment to ensure the normal operation of the equipment.
   The problem of automatic shutdown after the crusher is started may affect the production efficiency, and once such problems occur, they need to be solved in time. This paper analyzes the causes and solutions of automatic shutdown after the crusher is started, hoping to help customers better protect the crusher equipment and improve production efficiency. If you want to know more about the crusher, welcome to call or online consultation, message, Leitos machinery will send professionals to answer your questions.