Sand is broken by a variety of ores (quartz stone, river pebbles, granite, etc.) through the machine, is also a major building material needed in various industrial fields, rich in resources, easy to mine, in line with environmental protection requirements, has been vigorously promoted and supported, then the production of sand machine called? Which ones are there? Let’s take a look.

What is the name of the machine that produces sand? It is called sand making machine, stone sand making machine, sand punching machine, the name is different in different regions, in addition, because there are more types of equipment, so the name is not the same, according to various understanding, the impact sand making machine, the compound sand making machine is better, and it can be selected according to the size of raw materials, production requirements, site situation and budget

Impact sand making machine

The output per hour is 40-650 tons, suitable for all kinds of hard and brittle materials below 50 mm, using the combination of two working methods of stone and stone iron, as well as two feeding methods, the finished product is relatively fine, through the design of four impeller, the impact Angle of the crushing chamber is improved, through the volume increase, the output is large, the configuration of combined throwing head, only need to replace the wear part, At the same time, the upper and lower protection plate can be turned, extending the service life, coupled with the internal airflow self-circulation of the vortex chamber, coupled with the pulse dust collector, noise eliminator, in line with environmental protection requirements, through the DCS interface access to the central control system, all-weather monitoring, good operation, reduce manpower and material resources.

Compound sand making machine

Composite sand making machine picture

The output per hour is 5-100 tons, suitable for medium hardness materials below 100 mm, the main technical parameters are optimized and developed into a new type of fine/rough grinding product, which realizes a single operation, three-dimensional design, small footprint, no screen bar setting, it is not easy to block when processing materials with large mud content, and the water content can reach 8%. The wear parts are made of high hardness, high toughness, multi-component alloy wear-resistant material, the life is increased by 2-3 times, the gap between the hammer head and the impact plate can be adjusted to meet a variety of material conditions.